|
|
Measurement and linearization unit for flow meters
Maštera, Martin ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
Thesis describes the design and realization of linearization display unit that will receive pulses from a gear flow meter KRACHT whose frequency corresponds to a flow. The measured value is flow that nonlinearly depends on the temperature and viscosity of the medium. The dependency is described by calibration curves for each flow meter. The task of the diploma thesis is to design, implement, and verify the operation of the display unit, which calculates the actual flow rate from the input data (pulse rate, temperature, viscosity, and flow meter calibration curves). The device will contain a suitable user interface to display all measured values, inputs for connecting measuring sensors, and outputs for transmission of measured data. A part of the device will be a USB interface for configuration and uploading calibration curves from a PC application, which is designed by diploma student.
|
|
|
Effect of rivet holes on calibration curves for edge cracks under various loading types in steel bridge structure
Seitl, Stanislav ; Miarka, Petr ; Kala, Z. ; Klusák, Jan
Attention has been paid to fatigue cracks in steel structures and bridges for a long time. In spite of efforts to eliminate the creation and propagation of fatigue cracks throughout the designed service life, cracks are still revealed during inspections. There is some limitation of crack sizes which are detectable on structure (from 2 up to 10 mm). Note that depending on the location of the initial crack, the crack may dominantly propagate from the edge or from the surface. The theoretical model of fatigue crack progress is based on linear elastic fracture mechanics. Steel specimens are subjected to various load types (tension, three- and four-point bending, pure bending etc.). The calibration functions for short edge cracks that are near the hole for a rivet or bolt are compared for various loads and the discrepancies are discussed.
|
|
|
Measurement and linearization unit for flow meters
Maštera, Martin ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
Thesis describes the design and realization of linearization display unit that will receive pulses from a gear flow meter KRACHT whose frequency corresponds to a flow. The measured value is flow that nonlinearly depends on the temperature and viscosity of the medium. The dependency is described by calibration curves for each flow meter. The task of the diploma thesis is to design, implement, and verify the operation of the display unit, which calculates the actual flow rate from the input data (pulse rate, temperature, viscosity, and flow meter calibration curves). The device will contain a suitable user interface to display all measured values, inputs for connecting measuring sensors, and outputs for transmission of measured data. A part of the device will be a USB interface for configuration and uploading calibration curves from a PC application, which is designed by diploma student.
|
|
| |
guest ::
